Combined LED brake and tail light bulb (21/5W equivalent) for tail lamps. LED bulbs last longer than tungsten (up to 50000 hours), are not affected by vibration and are therefore less likely to leave you exposed on a dark night without a tail light. LED reaction time is also quicker making these a sensible upgrade to your standard bulb

This is a single white LED lamp for tail lights with a red lens. NB Not approved for road use

 3 in stock

HT lead rubber, used where HT lead screws onto plug cap or pushes onto ignition coil

 2 in stock

 14717600 GU14717600 14 71 76 00
 1471 7600 1471.7600 14.71.76.00

2 pin male block connector, used for main loom connections. See ELA17738 for the Molex connectors that go in this block. Use female molex connectors with this block

 2 in stock

3 pin female block connector, used for main loom connections. See ELA17603 for the Molex connectors that go in this block. Use male molex connectors with this block

 2 in stock

12 pin female block connector, used for main loom connections. See ELA17603 for the Molex connectors that go in this block. Use male molex connectors with this block

NB this connector has one zigzag end

 2 in stock

9 pin male block connector, used for main loom connections. See ELA17738 for the Molex connectors that go in this block. Use female molex connectors with this block

NB this connector has one zigzag end

 2 in stock

Brush kit for overhauling Valeo starter motor

check whether you have a Valeo or Bosch starter

 2 in stock

Rubber cover for starter motor lead from battery, prevents accidental earthing

Can also be used for M6 battery terminal lead ends

 2 in stock

19707100-z 19707100 GU19707100 19 70 71 00
 1970 7100 1970.7100 19.70.71.00

60/55W H4 P43T headlamp / headlight bulb

This is the more modern H4 bulb with three tabs . Also known as Guzzi ref. 292723

 2 in stock

 93450232 GU93450232 93 45 02 32
 9345 0232 9345.0232 93.45.02.32

Reconditioned starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. See ELA14738 for replacement solenoid.

This may fit Loop frame models with 5 speed gearboxes, you will need to trim a clearance into the battery tray to make room. The clutch cable bracket will prevent fitment on 4 speed models.

This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address. NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts. Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place

 2 in stock

 14730554 GU14730554 14 73 05 54
 1473 0554 1473.0554 14.73.05.54